hung-up facial tissue production line
|
Hung-up facial tissue automatic folding machine technical parameter |
|
|
NO. |
basic parameter |
|
1 |
unwind stand |
|
1.1 |
unwind stand quantity：2 |
|
1.2 |
maxi. raw paper diameter：≤1650mm |
|
1.3 |
raw paper shaft：use 3-inch shaft + 6-inch shaft sleeve |
|
1.4 |
raw paper change：manual |
|
1.5 |
paper leading：manual |
|
1.6 |
paper passby：Top passby |
|
1.7 |
drive mode：motor+ belt driving ( During normal start and stop, the raw paper does not slip and paper is not damaged) |
|
1.8 |
raw paper loading method：loading by cylinder |
|
1.9 |
paper edge aligning: Electric and manual, dual-use aligning system |
|
1.10 |
paper tension control：automatic paper tension control system |
|
2 |
folding unit |
|
2.1 |
design speed：120meters/min |
|
2.2 |
working speed：100 meters/min |
|
2.3 |
speed display：m/min |
|
2.4 |
sheet setting：3 plys: 50-600 sheets or 150-1800 plys |
|
2.5 |
paper sheet tolerance: ±1 sheets |
|
2.6 |
paper edge aligning tolerance：≤2mm |
|
2.7 |
paper length tolerance：≤±2mm |
|
2.8 |
paper spreading：Equipped with raw paper spreading roller (roller is curved rubber roll, middle height is adjustable) |
|
2.9 |
paper separation system：automatic paper separation |
|
3 |
Embossing Unit-optional |
|
3.1 |
model：steel to wool，steel to rubber，steel to steel |
|
3.2 |
drive：Independent motor drive (inverter control), motor to steel roller by synchronous belt transmission, steel roller to steel roller by gear transmission |
|
3.3 |
Gear requirement：Double helical gear (hardness HRC55) |
|
3.4 |
Hardness of steel roll：Surface HRC60 , chromium plated |
|
3.5 |
Steel roll replacement：Single roll can be disassembled independently, easy to replace |
|
3.6 |
Steel roller pressure mode：cylinder |
|
4 |
discharging system |
|
4.1 |
design speed：5logs/ min |
|
4.2 |
working speed：3 logs/ min |
|
4.3 |
discharging：flat belt |
|
4.4 |
control mode：variable frequency motor |
|
4.5 |
belt material：PVC/PU |
|
5 |
automatic overturn system |
|
5.1 |
design speed：5 logs / min |
|
5.2 |
working speed：3 logs/ min |
|
5.3 |
overturn control：cylinder |
|
5.4 |
transmission：flat belt |
Write your message here and send it to us
